Ambir DS485 Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemindai Ambir DS485. Ambir DS485 12 halaman. Ambir ds485: user guide
Juga untuk Ambir DS485: Spesifikasi (1 halaman)

Halaman Cetak

Initial Calibration with DocketSCAN

NOTE: Calibration is a critical step in setting up your scanner. It allows the image quality to

be optimally balanced for your computer and scanner combination. If at any time you switch

the computer that you use with your scanner, or change scanners, you will be required to

recalibrate your scanner.

STEP 1

Launch DocketSCAN

To open the DocketSCAN

short cut icon on your desktop

right-hand corner of the Windows Desktop).

Once you have launched DocketSCAN

step-by-step calibration instructions will appear in a succession of prompts.

This calibration process will require the special black and white calibration sheet that

was included with your scanner. When calibrating, make sure the page with the black

bars are facing down and note the direction of the arrows for proper insertion. When

the calibration process has been completed successfully, you will see the message above; if

you do not see this message you will need to recalibrate.

If you switch scanners or your image quality has become unsatisfactory, you can

recalibrate your scanner by choosing the CUSTOM button in the DocketSCAN

and select the Calibrate button.

Should you lose the black and white calibration paper that was included with your

Ambir scanner, you can simply use any plain white (the brighter the white the better)

piece of letter size (or A4) printer paper to perform the calibration. Simply fold the

paper in half and insert the folded end into the scanner first when calibrating.

The following message will be displayed (see below).

application you can either double-click the Adobe PDF

or the "Taskbar tray" icon

, you should select the SCAN button and the

- 7 -

...........................

(usually in the lower

window