Ambir BR100 Panduan Pengguna - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembaca kode batang Ambir BR100. Ambir BR100 2 halaman.
Halaman Cetak7. Language
*USA
Spain
Italy
Singapore
Salvadora
Japan
Thailand
Belgium
Sierra Leone
Turkey
7. Language (Continued)
Russia
"windows1251"
Russian
"Shi -jis"
Hungary
Germany
Algeria & Arabic
Spanish Latin
British
France
FULL ASCII
8. Barcode setting
2D handheld barcode
scanner default enable.
Enable url QR code
2D desktop barcode
Disable url QR code
scanner default disable.
9. Notice
1. Scanner cannot be activated.
Check whether the cable is firmly connected (there will
be a crisp sound a er the USB cable is connected to the
device) and then check whether the USB is properly
connected to the device. If it is not powered on, then try
to connect the USB port behind the host.
2. Data is not uploaded.
Check whether the USB cable is successfully connected
to the computer. If it is connected correctly, there will be
a prompt sound. The driver installation will appear when
connecting to the computer for the first time. A er the
driver is automatically installed, scan the code to test
whether there is a decoding prompt sound.
If the decoding is normal, please scan the USB
Keyboard in this Setup manual.
If there is no response a er scanning the code, please
scan "Recall default" and then plug it in again.
If there is no response a er re-powering, or no
response a er scanning the setting code, please contact
the dealer's for technical support.
10. Use equipment correctly
Please use the scanner a er the device has finished
booting to prevent the device from being unable to
recognize the scanner or causing the device to start
abnormally. (You can try re-plug the device to solve
this problem)
The following is the test barcode, which is used for
transmission test.
2D barcode test
12345678
1D barcode test
3
1 2 3 4 5 6 7 8 9 0 1 9