Ambir ImageScan Pro 940u Panduan Memulai Cepat - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Pemindai dokumen Ambir ImageScan Pro 940u. Ambir ImageScan Pro 940u 14 halaman. High speed document scanner with ultrasonic misfeed detection
Juga untuk Ambir ImageScan Pro 940u: Panduan Pengguna (13 halaman)
Halaman Cetak
Ambir ImageScan Pro
Installation and Setup
Step 1. Install the Paper Chute
1. Open the ADF cover by pulling the lever.
2. Install the paper chute by aligning and inserting
the tabs of the paper chute into their slots on the
scanner.
3. Close the ADF cover by pushing it back down
until it snaps back into place.
930u
TM
Step 2. Connecting the Scanner to
Your Computer
1. Plug the AC adapter into the scanner's power
2. Plug the other end of the AC adapter into a
3. Plug the square end of the included USB cable
4. Plug the rectangular end of the USB cable to an
5. If you plan to connect your scanner to a USB
Quick Start Guide
receptor
.
standard AC power outlet.
to the USB port
at the rear of the scanner.
available USB port on your computer.
hub, make sure that the hub is connected to the
USB port in your computer. Next, connect the
scanner to the USB hub.
3