Asko D1796FI Panduan Petunjuk Instalasi - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Peralatan Dapur Asko D1796FI. Asko D1796FI 14 halaman. Standard dishwashers
Juga untuk Asko D1796FI: Panduan Penggunaan dan Perawatan (12 halaman), Panduan Memulai Cepat (2 halaman), Instalasi dan Kustomisasi (4 halaman), Panduan Perencanaan dan Desain (19 halaman), Panduan Penggunaan dan Perawatan (12 halaman), Panduan Perencanaan dan Desain (15 halaman)

Halaman Cetak

INTRODUCTION

Read these instructions carefully and completely before

you install the machine. The installation should be

carried out by a qualified person who is familiar with all

local codes and ordinances for electrical and plumbing

connections.

If a dishwasher is being installed in this area for the

first time, most of the cabinet work, plumbing, and

electrical has to be done before you move the machine

into place.

WHAT YOU NEED

TOOLS

Phillips No. 2 screwdriver

Flat blade screwdriver

Torx screwdriver size T 20

Adjustable wrenches (if you use copper fittings)

Open-ended wrench (1/2" [12 mm] or 5/8" [16 mm])

Tape measure

Spirit level

Electric drill with 1" drill bit

Keyhole saw

MATERIALS

♦

Minimum 3/8" OD copper tubing of sufficient length

for your installation

♦

Shut-off valve and fittings for water supply line

Tip Guards (optional)

When it is not possible to attach the

dishwasher to the cabinet or the

underside of the cabinet top, you

should install tip guards to prevent the

machine from tipping when you open

the door.

Refer to page 4 for installation

instructions.

TECHNICAL DATA

Water pressure

18-176 psi

Power

120 v, 60 Hz, 15 amp.

Heating element

1400 w

Max loading

1650 w

Page 2

If you are replacing an old dishwasher, you must check

the plumbing connection and wiring before you move

the new dishwasher into place.

NOTE: Cosmetic damage must be reported to the

ASKO dealer within five days from the date of purchase.

As soon as you unpack the dishwasher, thoroughly

check it for cosmetic damage.

Tip Guards

(P/N 8070851)