Asko W6441 Manuale d'uso e manutenzione - Pagina 11

Sfoglia online o scarica il pdf Manuale d'uso e manutenzione per Elettrodomestici da cucina Asko W6441. Asko W6441 20. User manual use & care guide fr
Anche per Asko W6441: Manuale di avvio rapido (2 pagine), Manuale di pianificazione e progettazione (19 pagine), Supplemento al manuale di servizio (10 pagine), (Spagnolo) Guida all'uso e alla manutenzione (20 pagine), (Francese) Manuel D'utilisation Et D'entretien (20 pagine)

Stampa la pagina

DOOR OPEN BUTTON

The power must be on and you must press this button to

open the door. Hold down the button until the indicator light

goes off (approximately 3 seconds). You will hear the door

lock release. Please note that the water must be drained

before the door will open.

NOTE: Refer to "The door won't open" section in the

Troubleshooting chart on page 13 for

instructions on how to open the glass door in

case of a mechanical or power failure.

INTERRUPTING A PROGRAM

If you wish to interrupt a program to add an item to the

wash, press and hold the Door Open button (

the indicator light next to the button comes on

(approximately 3 seconds). Any water in the machine

will be pumped out before the door will open. Add the

item to be washed and, if necessary, add more detergent.

Close the door. The unit will start at the point it was

interrupted.

You can also interrupt a program by pressing the Start/

Stop button until the indicator light next to the button

goes off. When you press Start again, the unit will start

at the beginning of the program.

If there is water already in the tub, you will have to turn the

Program knob to Drain to drain the water then press the

Door Open button. The door will open when the water has

drained. Insert the item you wish to wash and close the

door. Add more detergent, if necessary. Turn the Program

knob to the desired program and press Start.

OPTION BUTTONS

The Option buttons allow you to select wash

temperatures, spin speeds, delayed start, extra rinses,

high-water level, and anti-crease. Each of these options

is defined in more detail in the following paragraphs.

NOTE: The unit is programmed to retain the option

selections, except for temperatures above 140°

and Delayed Start.

Temperature Button

Select wash temperatures by pressing this button until

the temperature you desire displays on the LED. The

temperature options are 85°, 105°, 120°, 140°, 160°,

175°, and 205° F.

"C" on the LED indicates the wash temperature will be

the same as that of the incoming water (cold).

The wash temperature for the Wool and Hand/Delicate

wash programs can only be set for cold, 85° F, or 105° F.

NOTE: The temperature selection cannot be changed

after the main wash has started.

Spin Speed Button

Select the spin speed by pressing this button until the

spin speed you desire displays. The spin speeds advance

in 200 rpm increments. The minimum spin speed is 400

rpm and the maximum is 1400 rpm.

The spin speed for the Perma Press, Wool and Hand/

Delicate programs cannot be set higher than 800 rpm.

You can also select No Spin, which is indicated by a

zero on the LED. The program will not have a spin cycle,

but it will drain.

There is also a No Spin/No Drain option, which is

indicated in the LED by the letters "no d." When you

select this option, the program will not have a spin cycle

and the unit will stop with water in the machine. You will

have to set the Program knob Drain, to drain the unit

before you can open the door. If you wish to spin the

load before you remove it, set the Program knob to Spin

so it will spin and drain.

NOTE: The spin speed can only be altered before the

main wash water is pumped out.

Delayed Start Button

This button lets you delay starting the program from 1

) until

to 24 hours. This means you can set the washer to start

at the most convenient time for you, such as an hour

before you arrive home from work. This feature is also

useful in areas where utility companies offer discount

rates during off-peak hours.

To select delayed start, press this button until the number

of hours you wish to delay starting the program displays

in the LED then press Start.

If you change your mind before you press Start, you

can void delay start by continuing to press the button

until a zero displays in the LED. To void this selection

after you have pressed Start, press and hold the Start

button until the selected temperature displays on the

LED.

Super Rinse Button

Press this button to add two rinses. The indicator light

next to the button stays lit when this option is selected

(on). Press the button again to turn the option off. (This

option cannot be altered after the main wash water is

pumped out.)

High Water Button

The normal water level for an ASKO is just below the

bottom of the glass door. Some users prefer to see the

water level, so ASKO added this option, which increases

the water level to about an inch above the bottom of the

glass door. It doesn't necessarily enhance the washer's

cleaning performance.

The indicator light next to the button stays lit when this

option is on. To cancel this option, hold down the button

until the indicator light goes off. This option cannot be

cancelled after the main wash has started.

NOTE: The Wool and Hand/Delicate wash programs

automatically have a higher water level.

Anti-Crease Button

This option is designed to reduce wrinkling of garments

that are not going to be taken out of the washer right

away. When you select Anti-crease, the drum will rotate

once every minute at the end of the program for two

hours or until you press the Door Open button.

The indicator light will stay lit when this option is on. To

cancel this option, hold down the button until the indicator

light goes off. This option cannot be cancelled after you

have started the program.

Page 11