Ambirad TORNADO Manuale d'installazione e d'uso - Pagina 10
Sfoglia online o scarica il pdf Manuale d'installazione e d'uso per Riscaldatore a gas Ambirad TORNADO. Ambirad TORNADO 16. Gas fired mobile heater
Anche per Ambirad TORNADO: Manuale di istruzioni (8 pagine)
Stampa la paginaThe combustion chamber can now be unscrewed.
Slide the burner assembly away from the firing
tube to reveal the burner assembly.
Inspect the burner electrode assembly condition
taking care when reassembling to ensure that the
leads to the assembly are fitted the same way as
on removal. If the electrode assembly is in good
order check the spark electrode gap. This should
be 3.5mm + 0.5mm. Adjust the gap if necessary
by bending the earth rod.
Access to the injector is by removal of the screws
that attach the orifice fixing plate to the burner as-
sembly.
To remove the injector with the burner head
removed, unscrew the injector from its carrier
using a spanner on the hexagon portion of its
body.
When replacing the injector ensure that it is fully
tightened in its carrier using an approved thread
sealant. Replace the sealing gasket if this is
not in good condition.
7.7 Component Replacement
To replace gas safety control valve, follow
instructions for burner maintenance from 7.6.
At previous step, do not remove the injector, but
unscrew the injector carrier and low gas pressure
switch block from the gas valve. The valve can be
replaced and the injector carrier re-fitted using an
approved pipe joining compound.