ACR Electronics PathFinder3 SART-3 Manuale di supporto al prodotto - Pagina 12

Sfoglia online o scarica il pdf Manuale di supporto al prodotto per Radio marina ACR Electronics PathFinder3 SART-3. ACR Electronics PathFinder3 SART-3 20. Search and rescue transponder

Stampa la pagina

1. Section 5 - Maintenance

Pole Mounted SART

1. The PathFinder™

one meter above sea level (see figure 6).

2. To operate, simply turn the bottom cap of the SART to release the pole.

3. Pull the pole downward and extend it to its maximum length.

4. To lock pole in position pull firmly across pole joints while twisting

slightly.

5. Tie lanyard to life raft to allow retrieval should the SART fall into the

water.

6. Push SART through life raft observation port and place foot of pole in

pocket at base of life raft.

7. Use life raft ties to hold SART pole near vertical.

8. Ensure SART is not obscured by metal objects or inflatable radar

reflectors.

9. Periodically check to see if SART is still vertical.

Y1-03-0170H

is supplied with a telescopic pole to raise the SART

Figure 6