AMC iA 480X Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Amplificatore AMC iA 480X. AMC iA 480X 12. Power amplifiers
Anche per AMC iA 480X: Manuale d'uso (12 pagine)

Stampa la pagina

Operation

Front panel operation

PROTECT INDICATOR

This LED lights up for a few seconds after the iA 480X is powered on and then

turns off if the amplifier is not damaged. This LED also lights when overheating

or other service problems occur. It is normal for the protection LED to fade

slowly when the amplifier is powered off.

SIGNAL CLIPPING INDICATOR

Lights whenever the channel is outputting signal at full strength and signal is

distorted. Reduce signal level to ensure undistorted output signal.

SIGNAL INDICATOR

LED in the front panel indicates audio signal of the amplifier.

POWER INDICATOR

This LED indicates status of the main power. The LED lights up if the amplifier is

powered on.

POWER SWITCH

Power switch is hided with cover to prevent illegal or incidental use. Remove

cover using Phillips screwdriver and use this switch to power on or off the am-

plifier. The power LED in the front panel lights up if the amplifier is powered on.

USER MANUAL

iA480X Power amplifier

Rear panel operation

COOLING VENT

Cool air is pulled in through the front panel fan filters and eliminated through

the rear panel vents.

VOLTAGE SELECTOR

This switch is used to set the input voltage to the power supply. Setting the

power supply voltage switch to the incorrect input voltage could damage the

amplifier. The correct voltage is determined by the country where the amplifier

will be used.

MAIN POWER CONNECTOR

Power connector is designed for main powers connecting to amplifier. This

connector is combined with fuse holder.

HOLDER FOR AC FUSE

Please use 10A, 250V fuse if amplifier is used in ~230V 50Hz electricity system

and 20A, 250V fuse if amplifier is used in ~115V 60Hz system.

LINK FOR DC 24V POWER SUPPLY

This connector is designed to link the DC 24V power to additional amplifier. DC

IN and DC LINK connectors are connected with each other directly, inside the

amplifier.