AMC iLive X2 Manuale d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'uso per Sistema microfonico AMC iLive X2. AMC iLive X2 16. Uhf wireless system

8. For the System Locking Control press the SET button for several times until you will see the

LCD screen as in picture 3.

After 2 -3 seconds the pictures, "LOC ON" or "LOC OFF " will appear on the position of

"LOCK". LOCK status can be changed by pressing " ^ " or " v " buttons.

After changes please push SET button one more time to confirm the settings. (Note: This

Control function is for locking receiver's current working status. If the locked state is "LOC ON",

it is unable to change the current operating status, if it is the non -locked state "LOC OFF" , all

the menu functions can be changed.)

Picture 3

Handheld microphone setup

1. Before starting, please open the battery cover and insert 2AA alkaline batteries.

2. Slide the transmitter ON/MUTE/OFF switch to the ON position. LCD displays the CHANNEL

and BATTERY LEVEL.

3. If you want to change the active channel, you need to change the channel into the

receiver and set receivers menu status as in picture1. After this, target transmitter's IR port in

to receiver's infrared automatic frequency window, after couple seconds channel will be

changed.

4. Slide the transmitter ON/MUTE/OF switch to the MUTE position, if the wireless system

should be used in silent mode. Please note that the microphone is still consuming power

when it is muted.

5. If " Lo bat" text appears in the microphone display, it shows that the battery is low and

needs to be replaced.

6. When you are finished using the transmitter, switch off the power source. Remove the

batteries when storing for long time.