AMCOL 6000E Manuale dell'operatore - Pagina 3
Sfoglia online o scarica il pdf Manuale dell'operatore per Controllore AMCOL 6000E. AMCOL 6000E 6. Electronic timing controller for forming and fabricating
Anche per AMCOL 6000E: Manuale dell'operatore (19 pagine)
Stampa la pagina
More About the 6000-ETC-FF
The 6000-ETC-FF is designed to convert
your 110 VAC, 24 VDC machine, or PLC
output (quickly and easily) to a dual
solenoid control box with electronic
adjustable injection rate timing. Using
this controller, Injection Pulse Rate will
not be controlled with a pneumatic
timer, but rather a variable electronic
output that can be quickly and easily
moved up and down.
A clear viewing screen shows the spray cycle settings. Figure 3 shows the main screen (top left)
that displays the current system settings. Additional screens allow for modification of these
settings.
To incorporate this technology, an AMCOL 6000E Precision Applicator is required. The two-
solenoid control package is available on new AMCOL 6000 Series Spray equipment and can
also be retrofitted to older model single air source systems.
The 6000-ETC Electronic Timing Controller includes:
Preprogrammed PLC.
•
6' grounded power cord with plug.
•
Open cable gland to insert your existing power output and make connection.
•
NEMA 12/13 sealed steel electrical enclosure.
•
Solenoid outputs prewired for quick connection to MAC 100 Series valves.
•
There are four available control packages:
1. 6000-ETC-FF-24 – Your control output is 24VDC.
2. 6000-ETC-FF-110 – Your control output is 110 VAC.
3. 6000-ETC-FF-24-LLI – Your control output is 24VDC, system has optional low-level light.
4. 6000-ETC-FF-110-LLI – Your control output is 110 VAC, system has optional low-level light.
ELECTRONIC TIMING CONTROLLER FOR FORMING AND FABRICATING 6000E SYSTEMS TD-OM
Figure 3
P A G E | 3