Amcor MD250 Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Deumidificatore Amcor MD250. Amcor MD250 6. Mini dehumidifier
Anche per Amcor MD250: Manuale di istruzioni (6 pagine)

Stampa la pagina

Specifications

Model Number

Voltage (VDC)

Power Input (W)

Water Tank Capacity

Moisture Removal

(ounces/24 hr @ 80°F 60% RH)

Weight

Dimensions

MD 250

12V

40W

1 pint

5.4 oz.

2.2 lbs.

10"H x 7"W x 6"D

Operation

1. Ensure unit is "OFF" when connecting the power cord.

2. Ensure that the filter and front vents are clean and not obstructed so air can

circulate freely through the unit.

3. The "GREEN" LED is on when in operation. The unit will switch off automatically and

the "RED" LED illuminate when the water tank is full.

4. To remove the water tank, first turn off the Mini Dehumidifier.

Hold the top of the unit, then remove the water tank and empty.

Replace the water tank back into the unit.

To continue dehumidifying, press the "ON/OFF" button to "ON" position again.

If the "BUCKET FULL" light comes on when using the unit for the first time, take the

bucket out and put it in again. The light will go off.

Emptying the Water Tank

• First, turn the MD 250 OFF (switch should be in the "O" position)

• Hold the top of the unit firmly and remover the water tank

• Turn the plug and empty the water tank

• Put the plug back in and place the water tank back into the unit

• To continue dehumidifying, press the button to ON ("I" position)

DANGER

Do not use this unit in a bathroom or shower.

Do not drip water onto the adaptor or dehumidifier.