Floe 510-17700-00 Manuale di istruzioni per il montaggio - Pagina 11

Sfoglia online o scarica il pdf Manuale di istruzioni per il montaggio per Attrezzatura per la nautica Floe 510-17700-00. Floe 510-17700-00 12. Standard roll-in leg conversion kit

Stampa la pagina

WITH THE CAP REMOVED FROM THE DOCK, USING A FLOE SPEED WRENCH OR 1-1/8" SOCKET

AND CORDLESS DRILL, ADJUST THE HEIGHT OF THE DOCK SO THE BOTTOM FRAME OF THE DOCK

IS APPROXIMATELY 8" ABOVE THE WATER. TURN THE DOCK ADJUSTING NUT ON THE TOP OF THE

DOCK CLOCKWISE TO LOWER AND COUNTERCLOCKWISE TO RAISE. USE A LEVEL TO MAKE SURE

ALL DOCK SURFACES ARE LEVEL (FIGURE 1.18). ONCE THE DOCK IS SET IN PLACE AND LEVELED,

INSERT THE PLASTIC CAPS IN THE ADJUSTMENT NUT HOLES (FIGURE 1.19).

FIGURE 1.18

FIGURE 1.19

SHEET 11 OF 12