Floe 6500 Manuale di istruzioni per il montaggio - Pagina 4

Sfoglia online o scarica il pdf Manuale di istruzioni per il montaggio per Sistemi di sollevamento Floe 6500. Floe 6500 8. 24 volt vsd drive

steP 1 - - - - - - - - - - - - - - - -

With the lift frame assembly done the VSD Drive Train and electronics can now be installed.

Apply a generous amount of anti-seize to the inside of the rigid coupler (Fig. 1A). Then attach

the "VSD Power Unit" to the "ball screw clamp" using four 3/8" x 1 3/4" bolts, four nylock

nuts, and eight flat washers as shown (Fig 1B). Torque to 10 ft/lbs. NOTE: The motor shaft

and the rigid coupler are keyed and must be aligned.

Apply anti-seize

Fig. 1A

steP 2 - - - - - - - - - - - - -

Attach the battery trays to the ball screw tube. The first one 8" from the

corner post and the second 3" from the first using the (4) 3/8 x 5 -1/2"

bolts and (4) 3/8" nylock nuts included with the lift frame hardware. The

offset side of the battery tray should be positioned to the outside of the lift

to provide clearance inside the lift. (Fig. 2) Torque to 25 ft/lbs.

Attach using four

3/8" x 1 3/4"

bolts, four nylock

nuts, and eight

Fig. 1B

- - - - - - - - - IMPORTANT - - - - - - - - -

Apply a generous amount of

Anti-Seize to the inside of the rigid

coupler attached to the Ball Screw.

Fig. 2

Page 4 of 8

flat washers