Floe P-1600 Manuale di istruzioni per il montaggio - Pagina 5

Sfoglia online o scarica il pdf Manuale di istruzioni per il montaggio per Sistemi di sollevamento Floe P-1600. Floe P-1600 12. Anchoring system
Anche per Floe P-1600: Manuale di avvio rapido (7 pagine)

ATTACH PLATES AND POCKET WELDMENT ONTO FRAME BEAM AS SHOWN IN FIGURE 1.2. FOR
V1600, P1200, AND PWC 1300 LIFTS, USE (2) 3/8" X 2-1/2 BOLTS FOR THE LOWER HOLES AND (2)
3/8" X 2-3/4" BOLTS FOR THE UPPER HOLES. FOR P1600 LIFTS, USE (2) 3/8" X 3-1/2" BOLTS FOR THE
LOWER HOLES AND (2) 3/8" X 3-3/4" BOLTS FOR THE UPPER HOLES. PLACE POCKET AT THE
APPROPRIATE DIMENSION FOR YOUR LIFT AS SHOWN IN FIGURE 1.3. MEASURE FROM THE INSIDE
OF THE CORNER POST ON THE WINCH END OF THE LIFT TO THE CLAMP. FOR PWC1300 LIFTS,
PLACE AT 26" FROM THE CORNER POST. FOR P1200 & P1600 LIFTS, PLACE AT 41" FROM THE
CORNER POST. FOR V1600 LIFTS, PLACE AT 29" FROM THE CORNER POST.
FIGURE 1.2
*
**
SHEET 5 OF 12
2X
*TOP HOLE
- PIVOT LIFTS
**BOTTOM HOLE
- V1600
FIGURE 1.3
2X