Floe VSD6500 Istruzioni per l'assegnazione - Pagina 8

Sfoglia online o scarica il pdf Istruzioni per l'assegnazione per Sistemi di sollevamento Floe VSD6500. Floe VSD6500 12. Full length pontoon & tri-toon bunks large lifts
Anche per Floe VSD6500: Manuale di istruzioni per il montaggio (8 pagine), Manuale di istruzioni per il montaggio (16 pagine)

Step 4

Attach the 118" rear frame beam to the

assemblied side frames using (4) 1/2" x

4" bolts, (8) flat washers, and (4) nylock

nuts. See Fig. 4A. The front frame beam

is attached the same as the rear but use

(2) 1/2" x 4" bolts in the top holes only.

See Fig. 4B.

The bolts in the bottom holes will be

installed in a later step.

At this time you need to square the frame.

Using a framing square as shown in Fig.

4A & 4B gradually tighten each bolt a little

at a time, and alternate checking for

squareness at all corner posts. Torque all

clamp bolts to 80 ft/lbs.

1/2" x 4" Bolt

w/ Flatwashers,

& Nylock Nut

Fig. 4B

Framing

Square

1/2" x 4" Bolts

w/ Nylock Nuts

Fig. 4B

Fig. 4A

SHEET 8 OF 12

Fig. 4A

Framing

Square

1/2" x 4" Bolts

w/ Nylock Nuts

1/2" x 4" Bolts

w/ Flatwashers,

& Nylock Nuts