Acer Veriton 3500 Manuale d'uso - Pagina 18

Sfoglia online o scarica il pdf Manuale d'uso per Computer portatile Acer Veriton 3500. Acer Veriton 3500 39. Veriton series

Connecting the power cable

Caution: Before you proceed, check the voltage range in your

area. Make sure that it matches your computer's voltage setting. If

they don't match, change your computer's voltage setting

according to your area's voltage range.

Set the voltage selector switch to the voltage range applicable to your area (a).

Plug the power cable into the power cable socket located on the rear panel of

your computer (b). Then plug the other end of the power cable into a power

outlet (c).

After connecting the necessary peripherals and plugging in the power cable,

you are now ready to turn the computer on and get to work.

To turn on your computer:

Turn on all peripherals connected to your computer, such as the monitor,

printer, speakers, etc.

On the front panel of your computer, press the Power button.

Important: Make sure that the power cable is properly plugged

into an electrical outlet. If you are using a power strip or an AVR

(Auto-Voltage Regulator), make sure that it is plugged in and

turned on.

To turn off your computer, follow the steps below.

For Windows XP:

On the Windows XP taskbar, click on the Start button, and click Turn Off

Computer, then click Turn Off.

Turn off all peripherals connected to your computer.

For Windows Vista:

On the Windows Vista taskbar, click on the Start button, and click

then click Shut Down.

Turn off all peripherals connected to your computer.

If you cannot shut down your computer normally, press and hold the power

button for at least four seconds. Quickly pressing the button may put the

computer in suspend mode only.

2 Setting up your computer