Aero Hawk Field Hawk Manuale di istruzioni - Pagina 5

Sfoglia online o scarica il pdf Manuale di istruzioni per Accessori per droni e quadcopter Aero Hawk Field Hawk. Aero Hawk Field Hawk 14.

Setup

Plug the yellow connectors together, and

Insert balance lead in the appropriate

port. Press enter and left and right to

adjust settings press stop to go back.

DO NOT

• Don't use batteries that are bulging or leaking.

• Don't leave batteries unattended while charging.

• Don't leave batteries in direct sunlight.

• Don't charge or handle a battery that is too hot to touch.

• Dispose of malfunctioning batteries properly.

IMPORTANT BATTERY INFORMATION

How to setup your charger to charge lipo batteries.

Press Enter

Press & hold

Enter

Full battery-16.8V

Refer Questions to [email protected]

Beeps when full or

Press Enter

time limit is reached

Near empty-13.6V

PROPER CHARGE

We recommend charging the 4S batteries at (1.5-3.5amps). A full 4S

battery will indicate 4.2 Volts per cell , an empty battery is 3.0 volts

per cell. You will be able to fly until each cell gets to about 3.4 volts

after that your battery will be too depleted to keep the drone in the

air.

WARNINGS

Do not exceed 4 amps for charging drone battery. Do not exceed 1.0 amp

for charging remote battery. Lipo batteries are delicate and you can

shorten their lifespan if you try to push their limits

When you fly an unmanned aircraft the Responsibility is yours.

Charge your Lipo batteries in a non conductive flame proof container.

Preferably outside on concrete.

Check your

battery