AME 11076 Manuale di istruzioni - Pagina 2

Sfoglia online o scarica il pdf Manuale di istruzioni per Strumenti AME 11076. AME 11076 8. Diamondback aluminum tire bead breaker with carrying case

Stampa la pagina

! WARNING !

To avoid serious personal in-

jury, always wear proper pro-

tective gear, such as hard

hats, safety glasses, gloves,

and steel toe shoes when us-

ing hydraulic equipment.

Failure to chock the wheels

and crib the vehicle can re-

sult in Serious injury or

death. Always deflate tires

before removing a wheel, a

rim, or part of a rim clamp or

nut. If you do not deflate the

tire, the tire could explode,

causing serious injury of

death. Always stand to one

side of the rim when using

the bead breaker. Standing to

one side of the bead breaker

allows you to maintain con-

trol of the bead breaker. If it

is not seated properly and

flies off the rim, the bead

breaker could cause serious

injury or death.

AME INTERNATIONAL

INSTRUCTION MANUAL

IMPORTANT RECEIVING INFORMATION

Visually inspect all parts for shipping damage. If you find shipping dam-

age, notify the carrier at once. Shipping damage is not covered by your

warranty. The carrier is responsible for all costs of replacement or repair

caused by shipping damage.

DESCRIPTION

The 11075 Bead Breaker is used on all types of rims except 5-piece

earthmover rims. It is ideal for use with truck, farm tractor, grader, com-

bine, and skidder tires. The 11075 can be used with a model (15000,

15020, 15040, 15920 and 15940), or equivalent 10,000 psi [700 bar]

pump.

SAFETY INFORMATION

To avoid personal injury or property damage while using this product,

read and follow all DANGERS, WARNINGS, CAUTIONS, and IN-

STRUCTIONS that are attached to, or included with, this product.

Introduction

This volume includes on operating and maintaining the AME 11075. It is

your responsibility to operate and maintain this unit in a manner that will

result in the safest working conditions possible.

Warranty of this unit will be void on any part of the unit subjected to mis-

use due to overloading, abuse, lack of maintenance and unauthorized

modifications. No warranty – verbal, written or implied – other than the

official, published AME new machinery and equipment warranty will be

valid with this unit. In addition, it is your responsibility to be aware of ex-

isting Federal, State and Local codes and regulations governing the safe

use and maintenance of this unit.

Throughout this manual, three means are used to draw information to

your attention. They are NOTES, CAUTIONS and WARNINGS and are

defined as follows:

Specifications

The AME 11075 Bead Breaker tool operates using two cylinders – a

clamping cylinder and a breaker cylinder at a 90

each other. Both the clamping and bead breaking actions are performed

automatically, and no mid-sequence operation by the user is required.

The 11075 Bead Breaker can bead break tires up to 29.5 x 29.

- 2 -

angle with respect to