Co2meter CM-0001 Manuale d'uso - Pagina 11

Sfoglia online o scarica il pdf Manuale d'uso per Data Loggers Co2meter CM-0001. Co2meter CM-0001 17. Co2 sampling data logger

Sampling Data Logger User's Manual

Settings

Settings – allows you to access all the parameters, options, outputs, communications, and date/time settings to be

changed or programmed.

Display Settings

Here you can change the brightness and color theme (3 available) on the device and you can also activate a Screen

Timeout to save power. This setting will not affect the meter's functionality but will affect the battery life

depending on how you set this parameter.

Port Settings

Here you can configure and activate ports that control additional accessories such as the device Modbus address.

Please call technical support for guidance and important information before making changes to the configuration

of any of these ports.

Time/Date Settings

Here you can change the date and time on the meter for more accurate reference on the records. The default time

of your meter could vary depending on your location. Review these settings before you start using the meter.

Logging Settings

All CM Data Loggers are preconfigured to sample once every five seconds. If this does not work for your

application, contact a CO2Meter technician for instructions on how to modify the sampling rate.

IMPORTANT:

LTERING THE PUMP PERIOD

CHANGE THE SAMPLE RATE WITHOUT SPEAKING WITH A

Using the Filters

In order to use this meter properly, hoses/tubing must be attached to the inlet and outlet barb fittings securely.

The pump will draw air from the inlet by vacuum effect, push it to the sensing chamber through the sensor, and

then exhaust the air outside the meter through the outlet.

Closed Loop Operation

DATA LOGGING INTERVAL

CO2M

ETER TECHNICIAN FIRST MAY VOID YOUR WARRANTY

Figure 4: Closed Loop

PWM PERIOD OR PUMP MODE IN

CO2Meter.com

PAGE 11 of 17