10Bar E-500 Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Camera Accessories 10Bar E-500. 10Bar E-500 12. Camera housing

(Fig. 11)

Note: If the O-ring is in good contact, a thin black line, about 0.5 to 1mm in width

should be visible, where the O-ring is in contact with the lid. Follow this line all

the way round the edge of the seal, as a final check that the seal is good.

The housing is now ready for the dive.

Important !!!

Before diving, make sure the pressure release plug is

pushed back inside and then screwed home, do not over tighten this

plug (finger tight only).

9/6/2006