Coalbrookdale MUCH WENLOCK Istruzioni per l'uso - Pagina 4
Sfoglia online o scarica il pdf Istruzioni per l'uso per Stufa Coalbrookdale MUCH WENLOCK. Coalbrookdale MUCH WENLOCK 5. Freestanding much wenlock stove with boiler
Anche per Coalbrookdale MUCH WENLOCK: Manuale di istruzioni per l'installazione (8 pagine), Manuale di istruzioni per l'uso (8 pagine)
Stampa la pagina
DE-ASHING AND ASH REMOVAL
(a) Riddle the bottomgrate by engaging the operating tool
in the right hand side square socket shaft - Fig. 3 and
rotate/reverse it sharply for about 10 strokes by which
time the fire should be free of ash. Riddle the grate at
least twice daily (more often if required) and always
before re-fuelling.
(b) Open the locked ashpit door with the operating tool.
Fig. 1.
(c) Remove the ashpan with the operating tool. Fig. 4.
Allow to cool before placing contents in a plastic bin or
liner.
NOTE: EMPTY THE ASHPAN AT REGULAR INTERVALS
AND DO NOT ALLOW ASH TO ACCUMULATE IN THE
ASHPAN UNTIL IT TOUCHES THE UNDERSIDE OF THE
BOTTOMGRATE AS THIS WILL SOON DESTROY THE
BOTTOMGRATE.
The continued presence of shale, stone or clinker in the
firebed will reduce burning rates.
To remove shale or stone from the firebed, open the
firedoor and rake fire upwards with a poker to bring the
shale or stone to the top and remove with tongs. The type
fuel and the ashpit door spinwheel setting, govern the
frequency of fuelling.
FUME EMISSION
WARNING: PROPERLY INSTALLED AND OPERATED
THIS APPLIANCE WILL NOT EMIT FUMES.
OCCASIONAL FUMES FROM DE-ASHING AND
REFUELLING MAY OCCUR. PERSISTENT FUME
EMISSION IS POTENTIALLY DANGEROUS AND MUST
NOT BE TOLERATED. IF FUME EMISSION DOES
PERSIST, THEN THE FOLLOWING IMMEDIATE ACTIONS
SHOULD BE TAKEN:
(a) Open doors and windows to ventilate room.
(b) Let the fire out or eject and safely dispose of fuel from
appliance.
(c) Check for flue or chimney blockage, and clean if
required.
(d) Do not attempt to re-light the fire until cause of fume
has been identified, if necessary seek professional
advice.
APPLIANCE CLEANING
WARNING: ALLOW THE APPLIANCE TO THOROUGHLY
COOL BEFORE CARRYING OUT THE FOLLOWING.
The flue pipe outlet should be swept on a monthly basis
to prevent flyash deposits restricting the flueway and
prevent fume emission and reduce burning rates.
(a) Open the firedoor, remove front firebar and remove
flue baffle plate.
(b) (i) Top Flue Outlet
Remove the access door incorporated in the flue pipe
(above the appliance). Insert provided flexible flue
brush through the flue pipe access door to clean top of
stove flueway. Fig. 6.
Brush deposits into firebox and replace flue pipe
access door.
3