Coalesse Lagunitas Istruzioni per l'installazione - Pagina 4

Sfoglia online o scarica il pdf Istruzioni per l'installazione per Arredamento per interni Coalesse Lagunitas. Coalesse Lagunitas 4. Corner screen replacement
Anche per Coalesse Lagunitas: Manuale (3 pagine)

Stampa la pagina

MESH AND FABRIC SCREEN BOTTOM GANGING BRACKET

INSTALLATION AND GANGING:

WARNING: To avoid damage to product it is recommended that two

(2) persons, minimum, are present to safely complete this installation.

NOTE: This procedure outlines connecting two lounge units using the

booth screen COLAGLBS, resulting in an enclosed booth screen

application. Complete lounge units are not shown to allow for a

detailed view.

Mark a line on bottom 4 inches from side of screen. Pull out the welt

cord and

On the center screen, remove both panel glides. Place a bottom

ganging bracket over one of the glide mounting holes, as shown. Install

one (1) supplied screw and reinstall one (1) glide to attach the bottom

ganging bracket to the bottom of the screen. Repeat for the opposite

side of the screen.

Place center screen, with all ganging hardware installed, upright

onto a pallet or suitable spporting object. Remove glide from adjoining

screen. Engage one (1) adjoining screen onto screen ganging clip in

center screen, until an audible click is heard (3a). Reinstall glide to

secure adjoining screen to bottom ganging bracket on center screen (3b).

NOTE: Ensure that all screen ganging clips are engaged and all screens

are aligned and supported until all ganging connections are complete.

Repeat step 1 to install remaining adjoining screen.

Remove assembled screens from supports and adjust all glides.

WELT

CORD

CENTER SCREEN

PROVIDED

SCREW

GLIDE

SCREEN

GANGING CLIP

COLAGLBS

CENTER SCREEN

BOTTOM GANGING BRACKET

ADJOINING

SCREEN

Page 4 of 4

GLIDE

69925 Rev B