Coalesse SW 1 Manuale - Pagina 4
Sfoglia online o scarica il pdf Manuale per Arredamento per interni Coalesse SW 1. Coalesse SW 1 11. Replacement of knit and fabric components
Anche per Coalesse SW 1: Istruzioni per il servizio clienti (7 pagine)
Stampa la pagina
NOTE: This page applies to the large "X"
base, "V" base and inline base.
NOTE: It is recommended that you use two
people to assemble the base assembly.
3.
Insert threaded rod into upper cone.
NOTE: Make sure tab in upper cone
aligns with threaded rod ring notch.
4.
Place column over threaded rod.
NOTE: Tabs and notches in upper cone
and column only allow one correct
position.
5.
Place onto base.
NOTE: Tabs and notches in base and
column only allow one correct position.
6.
Hand tighten lock nut on threaded rod loosely.
After ALL tabs and notches are aligned, fully
tighten lock nut to a torque of 30 ft-lbs.
3
4
5
6
939500440 Rev E
Page 4 of 11