Coastal WEATHERPAK TRx2 Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Stazione meteorologica Coastal WEATHERPAK TRx2. Coastal WEATHERPAK TRx2 18.

Stampa la pagina
4-2

TRIPOD TOWER

Assemble the tower in the following manner:
1. Insert and lock the legs onto the bottom section
of the tower, forming the tower tripod base.
2. Align the slot on the WEATHERPAK
guide pin on the quick release and push straight
in. DO NOT "screw" the WEATHERPAK
the KamLock connector. The KamLock provides
a precision sealed fit and may require an extra
push to properly seat the WEATHERPAK
the weather station is properly seated, press the
arms of the clamp down to assure a tight fit.
3. Place the entire unit (upper tower section and
WEATHERPAK
tighten the tower locking screw.
4. The WEATHERPAK
sampling data. When the WEATHERPAK
removed from the KamLock connector, it will stop
sampling and shut itself off.
4-3

VEHICLE MOUNT ADAPTER

Figure 2 – Optional Vehicle Adapter
P/N: 0302-117-002 Rev. C
) onto the tripod and finger-
is now running and
Coastal Environmental Systems offers an optional
Adapter (P/N S80061) which allows the WEATHERPAK
to be mounted onto a vehicle, van or trailer.
The adapter consists of a KamLock quick release (just like the
one on the tripod tower) with a 1 ½" National Pipe Thread, 25
feet of cable and a removable protective cap (See Fig. 2).
The threaded KamLock can be adapted to any type of vehicle
mounted tower or stanchion that fits your needs and vehicle.
The vehicle adapter provides power only (12 VDC) and data is
sent to the Receiver/Display via radio.
with the
onto
®
. Once
is
®
WEATHERPAK
User's Manual
Figure 1 – Assembly
Vehicle
®
TRx 2
TRx2
7