Aktakom ACM-2047 Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Strumenti di misura Aktakom ACM-2047. Aktakom ACM-2047 11. Clamp meter

7. LCD

This is a 3 3/4 digit Liquid Crystal Display with maximum indication of 3999.

Function symbols, units, bargraph, sign, decimal points, low battery symbols,

max/min symbols, and zero symbol are included.

8. Low Battery Symbol

When this symbol appears, it means the battery voltage drops below the minimum

required voltage. Refer to Section V for battery replacement.

9. Zero/Relative Symbol

When this symbol appears, it means a reference value has been subtracted from

the actual reading. The reading shown is a offseted value. Press and hold the

zero button for 2 seconds to disable this function.

10. Data Hold Symbol

Once the hold button is pressed, this symbol appears on LCD.

11. 40 segments Bargraph

Bargraph has forty segments. It displays segments proportional to the actual

reading. Each segment represent one hundred counts.

12. Max/Min Hold Symbol

Once the max/min button is pressed, either MAX or MIN shall be displayed on

LCD

13. Continuity Symbol

If ohm and continuity function is selected, this symbol shall appears on LCD.

14. Units Symbols

Once a function is selected, corresponding unit (V,  , A, or Hz) shall be displayed

on LCD.

15.Hand Strap

Put your hand through the hole of hand strap to avoid accidental drop of the clamp

meter.