Canon 900D - i Color Inkjet Printer Manuale di stampa - Pagina 42

Sfoglia online o scarica il pdf Manuale di stampa per Stampante Canon 900D - i Color Inkjet Printer. Canon 900D - i Color Inkjet Printer 48. Bubble jet printer direct printing guide
Anche per Canon 900D - i Color Inkjet Printer: Istruzioni per la configurazione (2 pagine), Manuale di stampa (4 pagine), Manuale di stampa (50 pagine), Manuale di avvio rapido (29 pagine), Manuale di stampa (30 pagine)

Aligning Print Head - Auto head align

Aligning the print head position allows you to print without shifts in the color registration.

There are two ways to align the print head, automatic or manual. First, try adjusting the print head

automatically. If the automatic print head aligning does not work or if you wish, you can adjust the print

head manually. See "Adjusting the Print Head Manually" on page 43.

1 1 1 1

With the printer on, load a sheet of A4 paper in the printer.

2 2 2 2

Align the print head automatically.

(1) Press the Menu button.

When Automatic Print Head Aligning Cannot Execute Correctly

When automatic print head aligning cannot execute correctly, the power lamp flashes orange 11 times

and the message "Failed to align print head" is displayed on the LCD. Please follow the procedure

below.

(1) Press the Resume button to clear the error.

(2) Open the front cover and check if there is ink left. If there is no ink left, replace the ink tanks. See

"Replacing Ink Tanks" on page 35.

(3) Print the nozzle check pattern to verify that the print nozzles are clean. See "Printing the Nozzle

Check Pattern" on page 38.

(4) Move the printer so that the paper output is not in direct sunlight and try automatic print head

aligning again.

(5) If the error persists, adjust the print head manually. See "Adjusting the Print Head Manually" on

page 43.

(2) Use the

buttons to select

Maintenance and then press the OK button.

The maintenance menu is displayed.

(3) Use the

buttons to select Auto head

align and then press the OK button.

The confirmation screen is displayed.

(4) Use the

buttons to select Yes and

then press the OK button.

A pattern is printed and the print head is

automatically aligned.