Aktakom AMM-1022 Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Multimetro Aktakom AMM-1022. Aktakom AMM-1022 18.

- Full compliance with safety standards can be guaranteed

only if used with test leads supplied. If necessary, they

must be replaced with the same model or same electric

ratings.

1.2 DURING USE

- Before using, you must select the right input jack,

function and range.

- Never exceed the protection limit values indicated in

specifications for each range of measurement.

- When the value scale to be measured is unknown

beforehand, set the range selector at the highest

position.

- Do not measure voltage if the voltage on the terminals

exceeds 1000V above earth ground.

- Always be careful when working with voltages above 60V

DC or 30V AC rms, keep fingers behind the probe

barriers while measuring.

- Before rotating the transform switch to change functions

and ranges, disconnect test leads from the circuit under

test.

- Never perform resistance, temperature, transistor, diode

and continuity measurements on live circuits.

- Never use the meter under the condition of the explosive

air, steam or dirt.

- If any faults or abnormalities are observed, the meter can

not be used any more and it has to be checked out.

- Never use the meter unless the rear case is in place and

fastened fully.

- Please do not store or use meter in areas exposed to direct

sunlight, high temperature, humidity or condensation.

AMM-1022