Aktakom APS-7306L Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Alimentazione Aktakom APS-7306L. Aktakom APS-7306L 12. Programmable dc power supply

flickers. Stop turning for a few seconds, the setting will stop

flickering and the power will return to the initial status.

3. Over current protection: Press the RECALL key and the

storage direction will flicker. At this time, press OUTPUT and it

will stop flickering, then the power is in the mode of over

current protection; that is, the over current protection starts

then the current is up to the set value; Switch off the output

voltage and the over current protection light [OCP] is on.

Eliminating the mode of the over current protection: press the

RECALL key and the storage direction will flicker. At this time,

press OUTPUT and it will stop flickering, then the power

supplies will exit from the over current protection mode.

CONTROL MODE WITH BUILT-IN MEMORY

Storage Selection: Press the RECALL key and the storage

direction light will flicker, which indicates the current storage

data. Then press the ↓ key and the next parameters of voltage

and current can be selected; press ↑ and the previous

parameters can be selected. In any storage direction, the

relevant storage units can be stored then the parameters of

voltage and current are set