aero-naut Foxx Manuale - Pagina 9
Sfoglia online o scarica il pdf Manuale per Giocattolo aero-naut Foxx. aero-naut Foxx 20. Pylon racer
Stampa la pagina
13
Bevel off front edge of elevator R 13 to
allow for sufficient control throw, then
glue in place control horn R 17.
Attention:
Note orientation of control
horn. The vertical edge faces aft!
When dry, sand front edge of control
horn flush with front edge of elevator.
14
Glue fin in place on tailplane R 12 and make
sure fin is at an angle of 90° in relation to
tailplane. Reinforce joint with R 22 (6×6 mm
triangular stock) on either side.
Attach elevator to tailplane with hinge film or
tape after model has been covered.
R 17
R 12
R 12
R 13
R 22