Acer BM270 Manuale d'uso - Pagina 24

Sfoglia online o scarica il pdf Manuale d'uso per Monitor Acer BM270. Acer BM270 32.

Stampa la pagina
Acer BM270 Manuale d'uso

Hot key3 (Selecting the input)

Open the Input control and select HDMI1 (2.0), DHMI2 (2.0), DP IN, Mini DP and DP
ALT or Auto Source. When you are done, press the joystick to exit current page and
store.
Main Menu
Press the MENU key to open the OSD.
Toggle the joystick
toggle to the right to navigate to the element you wish to adjust and press the joystick
to enter it.
Toggle the joystick
Information Hot Key
Modes Hot Key
Exit Hot Key
X
Picture
• Brightness: Adjust the brightness from 0 to 100.
Note: Adjusts the balance between light and dark shades.
• Contrast: Adjust the contrast from 0 to 100.
Note: Sets the degree of difference between light and dark areas.
• Black Boost: Adjust the Black Boost from 0 to 10. Enhances shadows by increasing the
brightness without changing lighter shades.
Note: If the image is very bright or has few shadow areas, adjusting this setting may not
result in any noticeable changes to the image.
• Blue Light: Filters out blue light to protect your eyes by adjusting how much blue light is
shown -- Off, 80%, 70%, 60%, or 50%.
Note: Higher values allow more blue light through. For the best protection select a lower
value.
When "Blue Light" is on, Brightness & Contrast will show each level of "Blue Light"
value.
• ACM: Turn ACM on or off.
Note: Set to "On", will be based on the current screen to dynamic contrast adjustment.
• HDR: Can control off and auto, the default is off, set to auto will automatically detect and
deal with HDR signal.
Input
Auto Source
Move
Enter
to the up
or down
to the left or right to adjust the sliding scales.
Show Monitor Information and Reset control function.
:
To change Modes Hot Key menu.
:
to exit current page and store.
Mode - Standard
Picture
Brightness
Color
Contrast
Black Boost
Audio
Blue Light
Performance
ACM
OSD
HDR
System
Light Sensor
Super Sharpness
Move
Enter
13
Input
HDMI1(2.0)
On
Exit
to select Picture from the OSD.Then
80
50
5
Off
Off
Off
Off
Off
BM270 User Guide English
X