Akura AH260LCD Manuale d'uso - Pagina 11

Sfoglia online o scarica il pdf Manuale d'uso per TV LCD Akura AH260LCD. Akura AH260LCD 19.

Using the TV features

Select channels by numbers

To select a channel : Press the channel numbers in series to select channel directly.

For example, to seclect channel 120,

then press the button 2, 12_ will display, press the button zero, you can enjoy the program of channel 120.

NOTE:

When you changing the channel, the sound state colour system state & sound system state graphics can be

displayed below the channel number. There are 3 sound states in this TV. If the sound is mono, the graphics is

If the sound is stereo, the graphics is

colour system state & sound system state is you preset the state.

When changing the channel, the sound of current channel will be firstly changed to stereo, NICAM dual I or DUAL I

according to the sound state of current channel. You can press the I/II button on the remote control to change

current sound type.

Adjust Volume

When menu is not displayed on the screen, press [VOL-] or [VOL+] to adjust the volume.

Use [Recall] button

Press the [ Recall ] button repeatedly to alternate between the present channel and the previous channel.

Display channel number

Press [Display] button to display the present channel number, but it will also disappear 3 seconds after your pressing.

Select picture modes

You can select the picture mode fromamong three preset modes and one user-set

mode. Press the [ P.mode ] button repeatedly to select the desired picture mode.

Select sound modes

You can select the sound mode from among three preset modes and one user-set

mode. Press the [ S.mode ] button repeatedly to select the desired sound mode.

Use [Still] button

Press the [ Still ] button to snapshot the present picture, and press again to return to normal watching.

Use [ Zoom ] button

Press the [ Zoom ] button to adjust the screen aspect ratio and zoom ratio.

Mute function

Press [ Mute ] button repeatedly to switch between mute and unmute mode.

Press the button 1, and 1_ _ will display on the top right corner of the screen,

. If the sound is dual I/II or NICAM dual I/II, the graphics is

- 8 -

. But the

BRIGHT

NORMAL

SOFT

USER

SPEECH

NORMAL

MUSIC

USER