barkman Bitsbox Manuale di avvio rapido - Pagina 7
Sfoglia online o scarica il pdf Manuale di avvio rapido per Camino da interno barkman Bitsbox. barkman Bitsbox 16. Landscape kits
7
A
Lay out the first layer of the wall
surround as indicated in the diagram.
B
Glue this layer down using the included
landscape glue.
USE:
(6) 8 x 12 blocks
(2) 8 x 8 blocks
(5) 4 x 8 blocks
(2) 4 x 4 blocks
8
A
Place the first row of Fire Brick as
indicated.
B
Using a rubber mallet, tap the Quarry
Stone to tightly fit against Fire Brick.
USE:
(7) 2.5 x 9 x 4.5 Fire Bricks
(2) 2.5 x 6 x 4.5 Fire Bricks
(1) 2.5 x 4 x 4.5 Fire Bricks
WARNING: Only use silicone when securing the fire brick. Do not use glue. Fire bricks are very light and heat resistant but must be
handled with care to avoid chipping upon installation.
9
A
Lay out the second layer of the wall
surround as indicated in the diagram.
B
Glue the 4 x 4 Quarry Stone down
using the included landscape glue.
USE:
(9) 8 x 12 blocks
(2) 4 x 4 blocks
IMPORTANT: Periodic checks must be
made to ensure that the layers remain
level. If layers are not level, use the
included shims to adjust as necessary.
7
Applying Glue and Silicone: Add 2 small
dots of landscape glue to the centre of each
Quarry Stone block. Press each block into
place so that there is no gap between blocks.
If a shim is used on a block, apply a line of
landscape glue across the entire block.
8" x 12"
4" x 4"
4" x 8"
4" x 4"
2.5" x 6 x 4.5"
8" x 12"
4" x 4"
Dots of landscape
glue
Apply silicone in the Quarry
Stone gaps from the fireplace
interior to fill spaces in
between so no light passes
through.
8" x 4"
2.5" x 4" x 4.5
06-2020