Barksdale Switch 2000 Istruzioni per l'uso
Sfoglia online o scarica il pdf Istruzioni per l'uso per Interruttore Barksdale Switch 2000. Barksdale Switch 2000 4. Dual pressure switch; dual temperature switch
Stampa la pagina
Dialog User Level (continued)
Dialog
Value
Function/Description
item
Only models with analog output:
0 ... xxx
Scale the analog output - start value (e. g. 0 bar = 4 mA)
*
0 ... xxx
Scale the analog output - end value (e. g. 400 bar = 20 mA)
*
(output signal start value always corresponds to the display initial value, e. g. 0
bar = 4mA)
Maximum turn-down 4 : 1, i.e. at values below 25 % of the measuring range
the analog output is switched off
0 ... xxx
Display of peak value „Max" (xxxx: = max. 125 % f. s.)
Delete the maximum value memory
= no deletion
= delete value
Error display:
= no error
= exceeding pos. measuring range
= exceeding neg. measuring range
= sensor error
= error switching output 1
= error switching output 2
= data error (EEProm)
= program error
= calibration error
= error analog out
IMPORTANT
When changing units from psi to bar or bar to psi, the switching point values must be changed
accordingly.
* Flashing of the mean segment signals a negative setting value.
8
Operating Instructions
Dual pressure switch Switch 2000
Dual Temperature Switch TempSwitch 2000
1
Intended Applications .................................................................................................... 2
2
Safety Instructions ......................................................................................................... 2
3
Standards ........................................................................................................................ 3
4
Warranty/Guaranty ......................................................................................................... 3
5
Installation/Commissioning .......................................................................................... 3
6
Maintenance/Cleaning ................................................................................................... 4
7
Technical Data ................................................................................................................ 5
8
Operation......................................................................................................................... 6
9
Programming .................................................................................................................. 6
10
User Level Dialog Switch 2000/TempSwitch 2000 ...................................................... 7
Barksdale GmbH
Dorn-Assenheimer Straße 27
D-61203 Reichelsheim
Tel.:
+49 (6035) 949-0
Fax:
+49 (6035) 949-111 and 949-113
email:
Internet: www.barksdale.de
Art. no.: 923-1440
Index O, 10.05.2011
Software-Version: V 2.1 and higher
Specifications are subject to changes
without notice!
1