Canon ZV-223 Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Stampante Canon ZV-223. Canon ZV-223 9. Instant camera printer

The device has a built-in battery. Please fully charge the device via the USB cable provided before using.

1. Insert the smaller end of the supplied USB cable into the device and other end into a chargeable USB

adapter.

The charging LED light, at the bottom of the device, will turn red to indicate charging.

3. Once fully charged, the charging LED will turn green.

- Operating time may vary depending on the battery status, operational status and environment

conditions.

An external MicroSD card (up to 256 GB) is needed for saving captured photos.

Only FAT16, FAT32 and exFAT format are supported.

PREPARING A MEMORY CARD

Use the following memory cards (sold separately)



MicroSD memory cards *1



MicroSDHC memory cards *1*2



MicroSDXC memory cards *1*2

*1 Cards conforming to SD standards. However, not all memory cards have been verified to work with the camera.

*2 UHS-I memory cards are also supported.

INSTALL AND REMOVE THE MicroSD CARD



Insert the MicroSD card into the slot at the bottom of the device. You will feel a slight click when the card

is fully inserted.



Push on the top of the card to release it. Gently pull to fully remove the card from the device.



If there is an error on ready / writing to the MicroSD card, the MicroSD Error LED Indication will be

displayed.



Connect the device to a computer by USB cable. Double-click the external drive image when it appears on

the computer to view and save the photos.

GETTING STARTED

CHARGING

Charging Status LED

Charging : Red

Full : Green

INSERTING SD CARD