Euro-Pro BPV325H Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Aspirapolvere Euro-Pro BPV325H. Euro-Pro BPV325H 8. Commercial back pack vacuum

Stampa la pagina

PRECAUTIONARY MEASURES

Important:

If the suction opening of the unit, the hose or the extension tubes are

BLOCKED, switch off the vacuum cleaner and remove the blocking

substance before you start the unit again.

Before inserting the power plug

into the wall outlet, make sure that

your hands are dry.

Before you start vacuuming,

make sure to remove large or

sharp objects that might

damage the dust bag.

When pulling out the power plug

from the wall outlet, pull the plug

not the power cord.

Do not pick up anything that is

burning or smoking such as

cigarettes, matches or hot ashes.

Do not use without all filters and

dust bag in place.

Do not vacuum any liquids.

Keep hair, loose clothing, fingers,

feet and all parts of body away

from openings, rotating agitator

and other moving parts.

TROUBLESHOOTING GUIDE

PROBLEM

POSSIBLE REASON

Motor runs but no

1. Hose extension tube or

suction

air inlet is blocked.

2. HEPA dust bag is full.

3. Hose not assembled to

hose inlet properly.

Turbo brush does

1. Rotating brush or elbow

not rotate or

obstructed.

rotates slowly

2. Belt is broken.

3. Hose is obstructed.

4. HEPA pre-motor filter is

blocked.

Vacuum won't run

1. Not firmly plugged in.

2. No electricity in wall

outlet.

3. Blown fuse/tripped

breaker.

4. Motor thermostat may

have tripped.

ORDERING REPLACEMENT PARTS

TO ORDER REPLACEMENT BAGS

Item #XHB325H

For Model BPV325H

Call: 1 (800) 798-7398

Monday to Friday 8:30 A.M. - 5:00 P.M.

Eastern Standard Time

Please Note:

The HEPA pre-motor and exhaust filters may be washed. We recommend that this be

done once a month or when suction appears reduced .To wash your HEPA pre-motor

filter and exhaust filter, hold and rinse under lukewarm water. When finished, shake off

excess water. DO NOT wash in dishwasher. It is important that when you wash any

filter, you allow it to air dry COMPLETELY before using again. We recommend 24

hours to air dry. DO NOT DRY IN DRYER.

IMPORTANT:

Both the HEPA pre-motor filter and the exhaust filter should be re-placed every three

(3) to six (6) months depending on usage. All filters, the shake-out bag and HEPA

dust bag should be checked regularly for signs of damage, preferable after each

cleaning task. The HEPA dust bag, shake-out bag and filters must be replaced

immediately if they become damaged. Always disconnect the vacuum from the

electrical outlet when checking the filters. NEVER re-use the HEPA dust bags.

Always replace the dust bags with new ones.

POSSIBLE SOLUTION

1. Check for blockage (remove

blockage).

2. Replace HEPA dust bag.

3. Insert hose into hose inlet

and turn counter-clockwise

until it locks into place.

1. Clear obstructions.

2. Call 1 (800) 798-7398.

3. Clear obstruction.

4. Clean HEPA pre-motor filter.

1. Plug unit in firmly.

2. Check fuse or breaker.

3. Replace fuse/reset breaker.

4. Turn vacuum off and unplug

from outlet. Allow unit to cool

down before trying to switch

on again.