Euro-Pro EP603H Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Aspirapolvere Euro-Pro EP603H. Euro-Pro EP603H 6. Retractable stick vac

Stampa la pagina

OPERATING INSTRUCTIONS

PLEASE NOTE: The white pleated filter

material in the HEPA Filter will discolor

over time -This is NORMAL and will

NOT affect the performance of the filter.

If the HEPA Filter

is properly

Fig. A

"TapCleaned"

after each use

Wash

once a

and suction

month or

does not return

when

to 100%, then

suction

we suggest that

appears

reduced

the HEPA filter

be "TapCleaned"

Warning:

Allow 24

vigorously until

hours for drying before

no more dust

replacing in unit.

can be removed,

then rinsed under the faucet and allowed

to dry for 24 hours before refitting into

the vacuum. (Fig. A) This should be

done once a month or when suction

appears to be reduced.

CAUTION

: The suction hole must

be open, free of any obstructions at

all times. Otherwise, the motor will

overheat and could become

damaged.

Warning:

Always empty the dust

cup container and clean the HEPA

filter, Non-Woven Pre-Filter and

Debris Screen before each use

and during prolonged usage.

Never over fill the dust cup container -

remove dirt and clean the HEPA filter,

non-woven pre-filter and debris screen

when dirt in dust cup is at or below the

"MAX" level during prolonged usage or

risk motor damage.

If you wash the Hepa filter or the non-

woven pre-filter, make sure that they

have completely air dried before

inserting back in the vacuum.

Please Note: The HEPA Filter is

washable. It should, however, be

replaced every three (3) to six (6) months

to ensure peak performance of your

vacuum.

The non-woven pre-filter, pre-motor and

post motor filters are washable. They

should however be replaced every three

(3) months to ensure peak performance of

your vacuum.

Important: Make sure that ALL filters

have completely air dried before re-

installing back in the vacuum.

Changing & Cleaning the Pre-

Motor Filter

The pre-motor filter is a washable filter

but should be replaced every three (3)

months.

• Remove the dust cup container, the

Non-Woven Pre- Filter and the HEPA

filter to remove the pre-motor filter.

(Fig 13)

• Rinse the pre-motor filter in lukewarm

water and air dry the filter completely

for 24 hours. Do not use a washing

machine to rinse the filter.

Do not use a hair dryer to dry it. Air

dry only. Never operate the vacuum

without the pre-motor filter in place.

• When the filter is dry, replace into the

unit and replace the HEPA filter and

dust cup container.

• A severely soiled or clogged filter

should be thoroughly washed with

fresh tepid water. A mild detergent

can be used if required.

Pre-Motor

Filter

Fig. 13

Changing & Cleaning the Post

Motor Filter

The post motor filter is a washable filter

but should be replaced every three (3)

months.

• Remove the filter cover from the front

of the unit and remove the filter.

(Fig. 14)

• Rinse the post motor filter in lukewarm

water and air dry the filter completely

for 24 hours. Do not use a washing

machine to rinse the filter. Do not

use a hair dryer to dry it. Air dry only.

Never operate the vacuum without the

post motor filter in place.

• When the filter is

dry, replace into the

filter cover and

replace the filter

cover to the unit.

Fig. 14

• A severely

soiled or clogged

filter should be

thoroughly washed

with fresh tepid water. A mild

detergent can be used if required.

OPERATING INSTRUCTIONS

WARNING:

Always remove the power

plug from the wall outlet before

assembling or removing accessories.

EXTENDING THE TELESCOPIC

TUBE

Push the locking button and pull the

larger tube up. (Fig. 1)

Locking

Fig. 1

Button

INSERTING THE TELESCOPIC

TUBE INTO THE MAIN UNIT

• Insert the telescopic tube into the hole

next to the dust cup handle. Make sure

that the slot in the handle fits correctly

into the opening. (Fig. 2)

• To remove the telescopic tube, press

the telescopic tube release button and

pull the tube up.

Fig. 2

ATTACHING THE FLOOR BRUSH

TO THE MAIN UNIT

• Insert the floor brush into its location,

in the direction of the arrow. (Fig. 3)

• To remove the floor brush from the

main unit, press on the floor brush

release button and pull the floor brush

out.

Floor Brush

Release

Button

Fig. 3

ATTACHING THE HOSE TO THE

MAIN UNIT

• Hold the end of the hose.

• Insert the hose into the hose

connector. (Fig.4)

Fig. 4