Canon CR-X500 2A Manuale di istruzioni - Pagina 17

Sfoglia online o scarica il pdf Manuale di istruzioni per Fotocamera digitale Canon CR-X500 2A. Canon CR-X500 2A 25. Remote camera

Stampa la pagina

Menu items

[Sharpness]

[Level]

[Detail Frequency]

[Coring Level]

[HV Detail Bal.]

[Limit]

[Noise Reduction]

[Level]

[Skin Detail]

[Effect Level]

[Hue]

[Chroma], [Area], [Y Level]

[White Balance]

[R Gain], [B Gain]

[Color Matrix Tuning]

[Gain]

[Phase]

[R-G], [R-B], [G-R], [G-B],

[B-R], [B-G]

[Color Correction]

[Select Area]

[Area A Setting Phase],

[Area B Setting Phase]

[Area A Setting Chroma],

[Area A Setting Area],

[Area A Setting Y Level],

[Area B Setting Chroma],

[Area B Setting Area],

[Area B Setting Y Level]

–10 to 50 (±0)

Sets the sharpness level of the video output signal and the recorded signal.

–8 to 8 (±0)

Sets the center frequency of horizontal sharpness. Setting higher values increases the frequency, which, in turn, increases the

sharpness.

–30 to 50 (±0)

Sets the level of correction of artifacts caused by high sharpness levels (coring). Higher values prevent sharpness from being

applied to minute details, resulting in less noise.

–8 to 8 (±0)

Adjusts the ratio between horizontal and vertical detail. Higher values emphasize vertical detail while lower values emphasize

horizontal detail.

–50 to 50 (±0)

Restricts how much sharpness is applied.

[Automatic],1 (lowest level) to 12 (highest level), [Off]

Reduces the amount of noise that appears in the image.

[High], [Middle], [Low], [Off]

–16 to 16 (±0)

0 to 31 (16)

The camera applies a softening filter to areas in the picture with skin tones to give a more pleasant appearance. By changing

these settings, you can determine what areas will be detected as skin tones. A zebra pattern will appear on the screen over

areas of the image that are detected as having skin tones.

[Effect Level]: Adjusts the level of the filter.

[Hue]: Adjusts the hue for detection of skin tones.

[Chroma]: Adjusts the color saturation for detection of skin tones.

[Area]: Adjusts the color range for detection of skin tones.

[Y Level]: Adjusts the brightness for detection of skin tones.

–50 to 50 (±0)

These settings adjust the amount of white balance throughout the whole image by changing the intensity of red tones ([R gain])

and blue tones ([B Gain]).

–50 to 50 (±0)

–18 to 18 (±0)

These settings adjust the color intensity ([Gain]) and color phase ([Phase]) of the color matrix, affecting the color tones of the

whole image.

–50 to 50 (±0)

Each matrix changes the tint of the picture along the color gradations detailed below, affecting the color tones of the whole

image.

[R-G]: cyan/green and red/magenta; [R-B]: cyan/blue and red/yellow;

[G-R]: magenta/red and green/cyan; [G-B]: magenta/blue and green/yellow;

[B-R]: yellow/red and blue/cyan; [B-G]: yellow/green and blue/magenta.

[Area A&B], [Area B], [Area A], [Off]

The camera detects areas with certain color characteristics (color phase, chroma, area and Y level) and corrects them when

recording. You can set the color correction for up to two different areas

(A and B) and apply the color correction to either one ([Area A] or [Area B]) or both of them ([Area A&B]). While color correction is

activated, a zebra pattern will appear on the screen over areas of the image detected as having the characteristics specified for

area A or area B.

0 to 31 (0)

These settings determine the color phase of the area to be corrected (A or B, respectively).

0 to 31 (16)

These settings determine the following color characteristics of the area to be corrected (A or B, respectively).

[Area A Setting Chroma], [Area B Setting Chroma]: Color saturation.

[Area A Setting Area], [Area B Setting Area]: Color range.

[Area A Setting Y Level], [Area B Setting Y Level]: Brightness.

Setting options and additional information

Custom picture settings