Euro-Pro SELECT EP923H Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Pulitore a vapore Euro-Pro SELECT EP923H. Euro-Pro SELECT EP923H 11. Steam cleaner with soap dispenser 120v., 60 hz, 1550 watts

Stampa la pagina

OPERATING INSTRUCTIONS

Using Your Steam Cleaner with

Steam Pocket

Step 1: Connect one of the extension

tubes to the hand grip on the

flexible steam hose. To

attach the extension tubes

one onto the other or onto the

hand grip, press the locking

button ensuring that it fits into

the hole. (Fig. 2, Fig. 3) To

disconnect, repeat the

operation by pressing the

locking button and pulling the

two sections apart.

Fig. 2

Fig. 3

NOTE:

Fit the steam pocket frame with the

angle adapter onto the extension

tube.

Step 2: If the angle adapter is not attached

to the steam pocket frame, hold the

steam pocket frame your left hand.

With the angle adapter pointing

downward, insert it into the hole of

the steam pocket frame, then turn

the steam pocket frame 180°.

Step 3: Insert the electrical power cord

into the wall outlet. Heating time

is approximately 8-10 minutes with

cold water. Filling the steam

generator with hot water will shorten

the heat up time.

NOTE: Do not use the soap injector with

the steam pocket attachment.

Attaching the Steam Pocket

Towel to the Frame

WARNING:

Always insure the

unit is "UNPLUGGED" from the

wall receptacle prior to attaching

or removing accessories.

1. Slide the steam pocket towel over the

steam pocket frame. (Fig. 4)

Fig. 4

2. Bring the towel all the way to the top

of the steam pocket frame. (Fig. 5)

Fig. 5

Bring the velcro strips that are on the

back side of the steam pocket towel

over the steam pocket frame and

attach to the inside of the front side of

the steam pocket towel. (Fig. 6)

Fig. 6

OPERATING INSTRUCTIONS

Attaching the Shoulder Strap

Using the detachable shoulder strap

allows for greater freedom of movement

when both hands are needed for

various cleaning tasks.

To attach the shoulder

strap to the steam

cleaner, simply snap

the shoulder strap

hooks onto the

connecting

rings on the

unit body.

Fig. 23

See Fig. 23, 24 & 25.

Fig. 24

Fig. 25

IMPORTANT:

When using the

steam cleaner with the shoulder

strap, avoid rocking or tilting the unit

excessively as this may cause water

to enter the hose and be discharged

along with the steam.

Assembling the Caddy

The casters for the caddy for the

steam cleaner are packed and

shipped unassembled. To assemble

the casters to the caddy, simply insert

the caster stem into one of the four (4)

holes in the base and push downward

with the palm of your hand. (Fig. 26)

Repeat for the next three (3) casters.

Fig. 26

Attaching the Steam Cleaner

to the Caddy

1. After you have inserted the castors

to the base of the caddy, turn the

caddy right side up on a flat, level

surface. Place it with the rear

locking latch to your right.

2. Hold the steam cleaner with the

power cord also to your right.

3. Insert the left side of the steam

cleaner (#1 in the illustration

below) down into the caddy making

sure that it clips into the front

locking tab.

4. Then press down on the right

side of the steam cleaner (#2 in the

illustration below) so that the rear

locking latch locks in place.

(Fig. 27)

Front

Locking

Tab

Locking

Fig. 27

Rear

Latch