Akura ADV148S Manuale di istruzioni - Pagina 18
Sfoglia online o scarica il pdf Manuale di istruzioni per Lettore DVD Akura ADV148S. Akura ADV148S 20. Dvd / mp3 / cd player
Before Requesting Service
Check the following guide for the possible cause of a problem before contacting service.
Symptom
No power
No picture.
No sound
The playback picture is poor
The DVD player does not start playback.
Severe hum or noise is heard.
The remote control does not work properly.
Completely distorted picture
or no colour
The
icon appears on screen
This product incorporates copyright protection technology that is protected by method claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing use only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Akura.p65
Correction
• Plug the power cord into the wall outlet securely.
• Select the appropriate video input mode on the TV so
the picture from the DVD player appears on the TV
screen.
• Connect the video cable into the jacks securely.
• Turn on the TV.
• Check audio connections.
• If you are using a HiFi amplifier, try another sound
source.
• Clean the disc.
• Correct the TV / DVD player colour system.
• Insert a disc, if no disc inside the player.
• Insert a playable disc. (Check the disc type, color
system and Regional code.)
• Place the disc with the playback side down.
• Clean the disc.
• Cancel the Rating function or change the rating level.
• Wipe them with a cloth slightly moistened with alcohol.
• Clean the disc.
• Connect the speakers and components securely.
• Move your TV away from the audio components.
• Point the remote control at the remote sensor of the
DVD receiver.
• Operate the remote control within about 5m.
• Remove the obstacle.
• Replace the batteries with new ones.
• If the picture is distorted completely or if the picture
rolls vertically, make sure the NTSC/PAL setting at
the DVD player matches the colour system of your
television.
• The DVD's software restricts it.
• The DVD's software doesn't support the feature (eg.,
angles).
• The feature is not available at the moment.
18
18
3/11/04, 12:45 PM