Domus Viento-48 Manuale di installazione - Pagina 8

Sfoglia online o scarica il pdf Manuale di installazione per Ventilatore Domus Viento-48. Domus Viento-48 17.

1. For fans that are not drop rod styles (i.e. Flush Mount Styles) the appropriate conversion kit should be used. The

fan should be installed and hanging from the ceiling. It has been design as a plug and play system, but to ensure

correct operarion wiring instructions are provided.

2. Make the wiring connection as shown in the illustration below. RF. sensor must be stuck outside canopy. Its

position depends on the RF. receiving condition.

BLUE

BROWN

RF ANT

CODE SWITCH

3. Once the connection has been made, the receiver inserts into the drop rod hanging bracket. The canopy comes

up to cover the receiver and bracket.

4. To change the batteries is to open the battery housing cover by sliding down the cover in the direction of the

arrow.

5. Use the screws provided to install the transmitter holder.

1 2 3 4

Note: The Ceiling Fan must be installed by a licensed Electrician. Ensure the power is switched off before fitting this ceiling fan.

For any questions, please call Domus® on (02) 9554 9600, Monday to Friday 9am – 5pm EST.

TO FAN/LIGHT/NEUTRAL

BLUE

TO FAN/LIVE

BROWN

TO LIGHT/LIVE

RF ANT

(Light/Live)

(Fan/Neutral)

29-31 Richland St. Kingsgrove. Sydney NSW 2208 Australia

RED

FAN MOTOR

AC POWER SUPPLY

BLUE

(Mains/Neutral)

BROWN

(Mains/Live)

RED

BLUE

BROWN

(Fan/Live)

Phone: 02 9554 9600

www.domuslighting.com

Installation Manual

Fax: 02 9554 9433

RF ANT