American Standard Colony 4310.016 Specifiche
Sfoglia online o scarica il pdf Specifiche per Arredamento per interni American Standard Colony 4310.016. American Standard Colony 4310.016 1. Round front 10" rough-in toilet
Stampa la pagina
COLONY™ ROUND FRONT
10" ROUGH-IN TOILET
❑
2388.010
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• 10" roughing-in
• Round front siphon action jetted bowl
• Fully glazed 2" trapway
• American Standard Aquameter™ Water Control
• Color-matched trip lever
• Sanitary bar on bowl
• 2 bolt caps
• 100% factory flush tested
❑
3338.012 Bowl
❑
4310.016 Tank
Nominal Dimensions:
660 x 508 x 743mm
(26" x 20" x 29-1/4")
Fixture only, seat and supply by others
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
To Be Specified:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Seat: American Standard #5322.011 "Rise and
Shine" solid plastic closed front seat with cover.
❏ Seat: American Standard #5308.014 "Laurel"
molded closed front seat with cover.
❏ Alternate Seat:
❏ Supply with stop:
© 2008 AS America Inc.
ROUND FRONT 10" ROUGH-IN TOILET
FINISHED WALL
19mm ± 6mm
(3/4 ± 1/4)
184mm
(7-1/4)
16mm
159mm
(6-1/4)
254mm
(10)
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 254MM (10") FROM FINISHED WALL TO C/L OF OUTLET.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
K97
660mm
(26)
419mm
(16-1/2)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
SUPPLY
AS
REQ'D
381mm
(15)
*
203mm
(8)
152mm
(6)
(5/8)
FINISHED
FLOOR
308mm
(12-1/8)
C/L OF OUTLET
COLONY™
VITREOUS CHINA
508mm
(20)
C/L
743mm
(29-1/4)
365mm
(14-3/8)
235mm
(9-1/4)
Revised 2/08