American Standard Metering 1340.725 Istruzioni per l'installazione - Pagina 2
Sfoglia online o scarica il pdf Istruzioni per l'installazione per Arredamento per interni American Standard Metering 1340.725. American Standard Metering 1340.725 4. Spread lavatory faucets
Anche per American Standard Metering 1340.725: Elenco delle parti (1 pagine), Istruzioni per l'installazione (3 pagine)
VALVE ASSEMBLY (1340.825; 1340.855; 1340.865)
Install LOCKNUTS (1), METAL WASHERS (3) and RUBBER WASHERS (2)
onto valve shanks.
Push TUBING (14) ends into VALVE (4) side outlets. Insert VALVES (4)
into mounting holes from underside of ledge.
Press TEE (5) onto SPOUT SHANK (6) making certain that the O-RING (7) is
properly seated on SHANK (6). Push COUPLING (8) into TEE (5) and
attach to SPOUT SHANK (6) and tighten.
Thread of VALVE BODY (4) should extend at least 5/16 inch above
MOUNTING SURFACE (11). If necessary, adjust LOCKNUT (1).
Place RUBBER RING (10) into ESCUTCHEONS (9) and thread onto valves
until snug against internal stop.
Tighten LOCKNUT (1) to secure VALVE (4) position.
Slide FERRULE (12) and COUPLING NUT (13) to outlet of VALVE (4)
and tighten COUPLING NUT (13) firmly.
Place WASHER (16) on top of VALVE ASSEMBLY (4).
Thread VALVE ACTUATORS (15) onto VALVES (4) and torque VALVE
ACTUATOR 12-15 ft. lbs, (12-20Nm).
Connect water supply to VALVES (4) with 1/2" IPS FLEXIBLE SUPPLIES or
3/8" O.D. BULL-NOSE RISERS. Use adjustable wrench to tighten connections.
Do not over tighten. Be careful not to kink copper supply when bending. Use
tubing cutter to cut to proper length.
10
5/16'' MIN.
4
3
=
VALVE ASSEMBLY (1340.725)
For Cold or Tempered Water Supply
Valve assembly is same as two handle lavatory faucets. See above
instructions for assembly, (1340.725 Single Valve Faucet) is for Cold
or Tempered water only.
10
5/16'' MIN.
4
3
MOUNTING
SURFACE
9
11
MOUNTING
SURFACE
2
1
9
MOUNTING
SURFACE
11
MOUNTING
SURFACE
2
1
15
10
11
16
12
13
4
HOT
14
5
8
1/2" IPS FLEXIBLE SUPPLIES or
3/8" O.D. BULL-NOSE RISERS
COUPLING NUT
11
5
8
1/2" IPS FLEXIBLE SUPPLIES or
3/8" O.D. BULL-NOSE RISER
COUPLING NUT
9
10
7
6
16
12
4
13
COLD
15
9
10
7
16
6
12
4
13
COLD OR
14
TEMPERED
WATER
968492