American Standard Traditional Champion 4 Elongated Right Height One-Piece Toilet 2034.004 Scheda tecnica
Sfoglia online o scarica il pdf Scheda tecnica per Arredamento per interni American Standard Traditional Champion 4 Elongated Right Height One-Piece Toilet 2034.004. American Standard Traditional Champion 4 Elongated Right Height One-Piece Toilet 2034.004 1. Elongated right height one-piece toilet
Stampa la pagina
TRADITIONAL CHAMPION
RIGHT HEIGHT™ ONE-PIECE TOILET WITH SEAT
❑
2034.004
• Vitreous china
• EverClean
surface inhibits the growth of
®
stain- and odor-causing bacteria, mold,
and mildew on the surface
• Low-consumption (6.0 Lpf/1.6 gpf)
• Features Champion® 4 Flushing System
performance platform
• 4" non-adjustable, piston action Accelorator™
flush valve
• 16-1/2" rim height for accessible applications
• Elongated siphon action jetted bowl
• 2-3/8" fully-glazed trapway
• Includes color-matched and design-matched
slow-close molded wood toilet seat and
cover with polished chrome hinges and
EverClean
surface
®
• Traditional styled polished chrome trip lever
• Two matching styled polished chrome bolt caps
• 100% factory flush tested
• 10 year warranty
Nominal Dimensions:
756 x 451 x 749mm
(29-3/4" x 17-3/4" x 29-1/2")
Fixture and seat only, supply by others
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures-
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
To Be Specified:
❏ Color:
❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black
❏ Supply with Stop (by other):
MEETS THE AMERICANS WITH DISABILITIES ACT
GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR
ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK
LOCAL CODES.
•
When installed, top of seat meets minimum requirement
of 432 to 483mm (17" to 19") from the finished floor.
© 2008 AS America Inc.
TRADITIONAL CHAMPION
RIGHT HEIGHT™ ONE-PIECE TOILET
4 ELONGATED
®
FINISHED WALL
756mm
(29-3/4)
44mm (1-3/4)
C/L OF SEAT
203mm
POST HOLES
(8)
140mm (5-1/2)
CENTERS
470mm
(18-1/2)
25mm
(1)
95mm
(3-3/4)
32mm
13mm
(1-1/4)
(1/2)
273mm
343mm
(10-3/4)
(13-1/2)
305mm
(12)
C/L OF OUTLET
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
*
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
K7
4 ELONGATED
®
VITREOUS CHINA
425mm
(16-3/4)
451mm
SUPPLY
(17-3/4)
AS
REQ'D
419mm
(16-1/2)
178mm
(7)
*
114mm
(4-1/2)
273mm
(10-3/4)
Revised 2/08
749mm
(29-1/2)
FINISHED
FLOOR