American Standard 1748 Manuale di istruzioni per il funzionamento e la manutenzione - Pagina 5
Sfoglia online o scarica il pdf Manuale di istruzioni per il funzionamento e la manutenzione per Vasche da bagno American Standard 1748. American Standard 1748 10. Aths with integral apron
Anche per American Standard 1748: Specifiche tecniche (2 pagine), Manuale di installazione e istruzioni per l'uso (16 pagine)
Stampa la pagina
Operation:
SYSTEM II WHIRLPOOL
BATHING:
• Fill bath with water at a comfortable bathing temperature - If your whirlpool is equipped with the
optional EZ-Heater, it will automatically maintain the water temperature.
• IMPORTANT: Do NOT fill the whirlpool more than 2/3 full before getting in, as it may overflow.
• IMPORTANT: Do NOT add bath oils or salts – this will damage the whirlpool pump.
• IMPORTANT: Water level must be at least one inch (25mm) above the highest jet before the whirlpool is started
Operating the system without water (dry running) for extended periods will cause pump damage and void the warranty.
OPERATING WHIRLPOOL:
AIR VOLUME CONTROL ADJUSTMENTS:
with the water. Rotate the air volume control counterclockwise for more turbulence, and clockwise for less.
FLOW JET VOLUME ADJUSTMENTS:
the nozzle counterclockwise for vigorous and clockwise for soft.
Pump Speed
Change
WHIRLPOOL CONTROL:
Press this button to turn pump on or off.
SPEED:
Press this button to alternate between high and low pump speed.
PULSE FUNCTION:
Press this button to start the pulse function.
Pump speed will continuously vary between high and low.
Press again to exit pulse function.
Water flow-levels can be adjusted from vigorous to soft by rotating
Whirpool
On/Off
Pump Pulse
Function
Water turbulence is determined by the amount of air mixed
5
751733-100 Rev. H