d2itsu PAR 50 Manuale d'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale d'uso per Pulitore d'aria d2itsu PAR 50. d2itsu PAR 50 16.

Operation

CONNECTING AND STARTING THE PURE AIRBOX HOME "S"

The unit you have purchased is a "Plug&Play" device, which means that it does not require

prior configuration. All you need to do is fix it to the chosen wall.

Before starting the assembly, check that you have all the necessary components: wall

mounting bracket, bolts and wall plugs, and the Pure Air Residential 50 purifier.

Find a power socket close to the purifier that it can be connected to.

IMPORTANT: do not pinch the cable.

The minimum recommended distance from the mounting bracket

to the floor is 80 cm, in order to guarantee optimum air intake.

Put the mounting bracket on the wall and mark the position of the

holes in order to drill the 2 holes required.

Fix the mounting bracket securely to the wall with 2 bolts.

Position the unit on the 2 extruding parts of the mounting bracket

and insert them into the 2 holes on the back of the purifier.

To start the unit, once the cable is connected to the power, put the start-up lever into the

"I" position.

Turn the speed regulation wheel until it is increased to the maximum (10).

After having checked it is working, it is recommended to set the purifier to its maximum

speed for the first 10 minutes in order to clean the room thoroughly.

SWITCHING OFF AND DISCONNECTING THE PURE AIR RESIDENTIAL 50

To switch the unit off, slide the ON/OFF button lever towards "0".

If you are going to stop using the purifier for an extended period of time,

it is recommended to disconnect the cable from the power.

=80cm

min

Pure Air Residential 50

| 9