American Standard Reminiscence Drop-In Whirlpool 2908.XXXW Istruzioni per l'installazione
Sfoglia online o scarica il pdf Istruzioni per l'installazione per Vasche da bagno American Standard Reminiscence Drop-In Whirlpool 2908.XXXW. American Standard Reminiscence Drop-In Whirlpool 2908.XXXW 4. High gloss acrylic shown less all fittings whirlpool
Stampa la paginaREMINISCENCE
DROP-IN™
HIGH GLOSS ACRYLIC
SHOWN LESS ALL FITTINGS
330mm
(13)
457mm
229 x 305mm
(18)
(9 X 12)
FLOOR
CUTOUT
914mm
(36)
64mm REF.
INTEGRAL
(2-1/2)
FITTING DECK
152mm
(6)
C/L OF
DRAIN
OUTLET
RIM AT
DRAIN END
C/L OF OVERFLOW
149mm REF.
(5-7/8)
79mm
INTEGRAL
(3-1/8)
SUPPORT
FEET
ROUGH
FLOOR
1-1/2 N.P.T.M. THREADS
1-1/2 O.D.TAILPIECE
GENERAL SPECIFICATIONS FOR 2908 WHIRLPOOL
INSTALLED SIZE
66 x 36 x 24-1/4 In. (1676 x 914 x 616mm)
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
MIN. OPERATING GAL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT
3
)
WHIRLPOOL ELECTRICAL SPECIFICATIONS
SYSTEM I PUMP
SYSTEM II PUMP
GENERAL INSTALLATION INFORMATION
Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor
immediately.
After inspection and during installation, protect the bath from construction damage. After installation, and before
enclosing with wallboard, tile, etc., water test the unit and check for leaks.
Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect
the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump,
motor, or piping system.
Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and
enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead
(required for recess installations).
Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.
WARNING! Do not lift whirlpool by the piping harness at any time.
FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.
752535-100 Rev. F
2908.XXXW SERIES
WHIRLPOOL
INSTALLATION INSTRUCTIONS
1676mm
(66)
ON/OFF
SWITCH
PROVIDE ACCESS
OUTLINE OF
TO PUMP FOR SERVICE
CUTOUT
ON ALL INSTALLATIONS
SAFE-T-HEATER
REMOVABLE BLANK
LEVELING STRINGER
73mm
(NOT FOR SUPPORT)
(2-7/8)
464mm
(18-1/4)
117mm
70mm
(4-5/8)
(2-3/4)
95 Lbs. (43 Kg.)
659 Lbs. (299 Kg.)
68 Gal. (257 L.)
55 Gal. (208 L.)
40 x 18 In. (1016 x 457mm)
53 x 28 In. (1330 x 718mm)
15 In. (381mm)
40 Lbs./Sq. Ft. (191 Kgs/Sq. m.)
1.6 HP, 9.7 AMPS, 120V.
2.1 HP, 15.6 AMPS, 120V.
THANK YOU...
for selecting an American Standard bath. Your new
bath is shipped to you after careful inspection. The
PUMP
whirlpool version is completely assembled with pump,
motor, and system piping. All you need to finish the
installation are your selected fittings and electrical
connections for a whirlpool.
To insure maximum performance and pleasure from
this product, please follow the instructions and
cautions.
List of Optional Components (not included):
• Safe-T-Heater 9075.120*
* see your American Standard Distributor
616mm
List of Required Components (not included):
(24-1/4)
• Drain 1583.470*
* see your American Standard Distributor
List of Required Tools and Supplies:
Tools
• Level
• Tape Measure
• Pipe Wrench
• Slip Joint Pliers
• Screw Driver
• Standard
Woodworking Tools
• Personal Safety
Equipment
23.8
44.5
• Caulking Gun
• Bath Filler*
Supplies
• Nails
• Putty
• Caulking (waterproof)
• 1 x 3 or 2 x 2
Stringers
• Drop Cloth
• 15 or 20 amp
GFI Outlet
• Cement, Plaster,
Grout
© American Standard Inc. 2005
All product names listed herein are trademarks
of American Standard Inc. unless otherwise noted.