Domyos VE 420 Manuale di montaggio - Pagina 12

Sfoglia online o scarica il pdf Manuale di montaggio per Allenatore ellittico Domyos VE 420. Domyos VE 420 18.
Anche per Domyos VE 420: Manuale (18 pagine)

Stampa la pagina

CONSOLE FUNCTIONS

Display zone:

1- Display zone of programmes

2- Display of heart rate, calories expenditure, speed and distance

covered

3- Display of training time

4- Select user age

5- Select gender (Male / Female)

6- Indicator of settings for cardiac target zones

7- On/Off indicator for the bleeper which warns you that you have

exceeded the upper or lower limit of the cardiac target zone

8- You are in «SETTINGS» mode

9- You are in «PROGRAMMES» mode

10- Indicators to show when you are below or above your target

cardiac zone setting

Functions:

- Speed: This function gives you an estimated speed, this can be in kph (kilometres per hour) or in mph (miles per hour) depending

on the position of the switch on the back.

- Distance: This function indicates the estimated distance since the start of the workout. This can be in KM (kilometres) or in MI

(miles) depending on the position of the switch on the back.

- Time: This function indicates how much time has elapsed since the beginning of the session; this indication is in Minutes: Seconds

(MM :SS).

- Calories: This function shows the estimated number of calories burnt since the start of the workout.

- Heart rate*: The heart rate is measured by the pulse rate sensor on the handlebars. Your heart rate is displayed in number of beats

per minute.

*Caution: This measurement is only a rough indication and is under no circumstances medically reliable.

Power, confirm, pause or stop button. Starts «QUICK START» mode

Starts «SETTINGS» mode

Starts «PROGRAMME» mode

Scrolls programmes and adjusts values

Settings at the back of the console:

- Slider VE / VM: Selection of type of apparatus that you are using with the console: VM (Exercise bike) / VE (Cross Trainer)

- Slider MI / KM: Selection of unit of measurement for DISTANCE MI (Miles)/ KM (Kilometres)

Resetting the product:

- The product goes on standby after being inactive for five minutes.

- The indicators return to 0 when in standby mode (does not store data).

- Press the RESET button at the back of the console.

Installing batteries:

1- Remove the console from the bracket, remove the battery cover which is

located at the back, place four LR06 batteries (1.5 V) in the slot provided

at the back of the screen.

2- Make sure the batteries have been inserted properly and have perfect

contact with the springs.

3- Replace the battery cover on the product ensuring it is closed properly.

4- If the display is illegible or incomplete, remove the batteries, wait 15

seconds and then replace them.

5- If you take out the batteries the computer's memory will be erased.

Recycling:

The "crossed-out bin" symbol indicates that this product and the batteries it contains cannot be thrown away with

household waste.They must be separated and recycled specially. Take the batteries and unusable electronic product to

an authorised collection area for recycling. Recycling your electronic waste will protect the environment and your health.

Use:

Your cross trainer works with batteries or connected to the mains. The console switches off after 5 minutes of inactivity. We

recommend removing the batteries if you do not use your bike for a long time or if you use the mains.

When turning on (mains connection or battery installation), the console launches QUICK START mode. Hold down

«SETTINGS» mode and to

access «PROGRAMMES» mode. A the end of your workout we recommend taking a minute to cool down

'COOL' . A recap of your workout is shown.

VE / VM

RESET

MI / KM

to access