Da-Lite IDEA Screen Libro di istruzioni - Pagina 9

Sfoglia online o scarica il pdf Libro di istruzioni per Schermo di proiezione Da-Lite IDEA Screen. Da-Lite IDEA Screen 12. For epson brightlink displays (16:9)
Anche per Da-Lite IDEA Screen: Libro di istruzioni (8 pagine), Istruzioni (2 pagine), Manuale di istruzioni (16 pagine)

Stampa la pagina

Wall Mounting Instructions for Multi-Panel Screens (continued)

6. Repeat Steps 4-5 to install the remaining L-brackets for the

remaining panels.

NOTE: At this point, all L-brackets will be mounted on the wall; two

L-brackets for each panel. Do not proceed if all L brackets are not

level with each other on the wall.

Steps 7-8 require at least four people. Place one person on the

far left end of the screen, one person at the left panel seam,

one person at the right panel seam and one person on the far

right end of the screen. More people can be utilized as

needed. When lifting the screen off of the clean work area to

the wall and then onto the wall, it is crucial that the screen

remain coplanar and does not bend at the seams.

CAUTION: Any bend between the panels at the seams may

damage the screen or result in a permanent gap between the

seams.

7. Using all four people, carefully lift the fully assembled multi-panel

screen to an upright position and place underneath the mounted

wall and L-brackets. The screen will be parallel to the wall at the

end of this step.

8. Using all four people, carefully and in a smooth motion lift the

screen to hang it on the four installed wall brackets. There is a lip

on the back of the frame that wedges itself into the wall brackets

once full installed. Ensure that the screen clears all L-brackets and

that the screen weight is on the wall brackets, not the panel

L-brackets.

9. Tap the bottom of the panel L-brackets with the rubber mallet

until they make contact with the frame. Secure the panel

L-brackets to the frame with the remaining (12) #8 x 1/2" screws

(Figure 6).

Figure 6

#8 X 1/2" Screws