Da-Lite G-200 Manuale di istruzioni - Pagina 3

Sfoglia online o scarica il pdf Manuale di istruzioni per Proiettore Da-Lite G-200. Da-Lite G-200 8.

ASSEMBLY INSTRUCTIONS (FIG. 1)

The G-200 overhead projector comes packaged in two

basic assemblies–the projection light box and the post -

head assembly. Instructions for assembly are as follows:

1. Remove 2 screws (A) from post.

2. Insert post into square hole in projector lid. Align

holes in post with holes on the side of the projector

lid.

3. Insert 2 screws (A) and tighten.

The G-200 overhead projector is now ready for

operation.

OPERATING INSTRUCTIONS

1. Set the projector, with the switch facing the screen,

on a projection table. Make sure the projector is

placed at a projection distance consistent with the

size of the screen, as indicated in the projection table

on page 2.

2. Connect the power cord to a suitable grounded

electrical outlet (refer to nameplate for electrical re-

quirements.)

3. Turn on the switch.

4. Place projection copy on projection stage.

5. Raise or lower image on screen by tilting top portion

of projection head. (Do not touch lens elements.)

6. Focus image on screen by turning the focusing knob,

which raises or lowers the projection head.

7. To turn off the projector, simply push the switch

down.

8. The G-200 is supplied with a safety thermal switch to

prevent fresnel or light box overheating. In the event

of motor malfunction or tampering, the G-200 lamp

will shut off automatically due to temperature rise.

(UL listed system.)

FIG. 1