Daan Tech Bob Manuale di avvio rapido - Pagina 4

Sfoglia online o scarica il pdf Manuale di avvio rapido per Lavastoviglie Daan Tech Bob. Daan Tech Bob 14.

Stampa la pagina

2 options for evacutaing the waste water

Siphon drain pipe

Connect the water outlet hose to a siphon drain pipe (usually accessible

under the sink)

Warning: The waste water coming out of Bob can reach high

temperature of up to 70°C.

Install the water outlet drain hose either in a fixed or flexible mode by using the

equipment provided.

Fixed installation

Place the drain hose directly

in your sink and fix it with

the equipment provided.

Flexible installation

Place the drain hose in a

container (jerrican, bucket,

etc...)

To avoid possible flooding, the container shall have a capacity of at least 5L.

2.3 | Power plug

WARNING: Please turn the power supply off before installing Bob.

Connect the power cable to Bob's back.

Before you connect Bob to the power supply, please make sure that the voltage on the

type plate corresponds to the voltage of your power supply.

The appliance must be placed on an even and stable surface. Daan Tech is not liable for

any damage caused by placing the device on an uneven and/or unstable surface during use.

Do not plug or unplug by pulling the cord, but always

pull the plug directly.

3 | G

ettinG Started

2 Options of water supply mode :

Use the water inlet pipe. The water tank is automatically filled before each cycle,

so there is no need to fill it manually. It is the preferred choice if you use Bob as a built-

in dishwasher or if you have close access to a water supply.

Use the built-in water tank: convenient, because it makes Bob completely

autonomous to use wherever you are. Fill the built-in water tank with Carafe. This is

the preferred choice if you intend to regularly move Bob around or if you do not have

access to a water inlet.

4 | C

apaCitive door openinG

When you touch the door, it automatically opens.

The capacitive area is here

To avoid problems, the capacitive door opening is

deactivated for 3 seconds after closing the door.

When Bob is disconnected from the power supply

you can still open the door but you will encounter

greater resistance due to the deactivation of the

door's capacitive opening system.

Convenient, because you can open the door

of your Bob with your elbow, for instance, if

your hands are dirty!